|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Add:Yuecheng industry area of Jiangyin, Jiangsu Linkman:Tang Kaidong Tel:0510-86580268 Fax:0510-6580278 Post Code:214404 Http://www.chenggangz.com |
………………………◇◇◇Air Flow Drier Series◇◇◇…………………………
●A new type equipment integrated drying technology with fluidizing technology. ●Absorbed and analyzed the domestic & foreign advanced theroy ,documentation and equipment. ●Series products developed jointly with rich experenced technicians and used successfully in chemical industry. ●Be meticulous in design and manufacture in accordance with matter nature and processing conditions so as to complete turnkey project. Main Characteristics ●The equipment is integrated with crushing ,drying and grading .Its input matter is slurry and the output is dried powder. ●It is an equipment with compact design ,small volume and high productivity. ●Power consumption per unit of product is lower while it has high drying capacity so that it is an energy saving facility. ●Excellent sealing performance ,high rate of product recovery and less environment pollution , thus benefiting the state as well as people. ●Shorter drying duration ,good quality of product and suitable for heat-sensitive matters. Application This equipment is applicable of continuously drying matters with high humidity, high consistency ,high viscosity and sensitivity in paste ,powder ,or particle state such as dye , pigment ,coating ,forage ,fertilizer ,fluxing agents of chemical fibre and rubber in chimecal ,light ,petrochemical ,pharmaceutical .food and mining industries. Work Principle Hot air entering into air distributor (3) tangentially will go to drier (6) at high speed from the bottom of the conical section ,where it is driven by stirrer (4) to create a strong whirlwind .The matters loaded into the drier by screw-type feeder (5) will be broken into pieces by the stirrer , and then are heated and dried thoroughly by the hot air .Under the action of strong centrifugal force ,these broken pieces impact and frictionize each other to become very fine particles in fluidizing state (the high temperature zone from the feeding port to the bottom of the drier is also called as fluidizing section ).Most portion of moisture of the matters will be vapoured in the fluidizing section .The dried particles are moved to the upper part of the drier for further drying by the whirlwind. There is a circular apron on the top part of the drier called as grader (7) ,above which is the grading section .Those matters with big particle size or much moisture will be spun off to the wall of the drier under centrifugal force and stopped back to the drying section by the circular apron for redrying .Only those particles which are very fine and have been completely dried will be carried into cyclone separator (8)by hot air through the hole of the grader . The dried products are filled into the bags continuously through a pocket unloader. The wet hot air is discharged through bag duster (10) by means of a draught fan (11) . Processing Flow Chart
Specifications
Note:Data in the Table is only used for the products with normal temperature requirement .However ,that for the heat sensitive products or the products with special requirement shall be varied.
Features : ●Material is dried under fluidized condition with large drying strength ,esp .suitable for large batch continuous production . ●Instantaneous drying time (only few seconds for the whole duration )ensures the material temperature under 80℃ even though it has a higher inlet air temperature ,which is suitable for drying of thermal sensitive materials . ●Few access to the outside and no contamination to the materials ,therefore high quality product is ensured . Application : It's widely used for continuous drying of loose powder ,granulate materials in such fields as foodstuffs ,chemicals ,pharmaceutical ,building materials and plastics etc .for instance : glucose ,feed ,fertilizer ,pesticide .raw material drug and dye-materials etc . Specification :
Characteristics ◆The working principle of FG series drier is that the dry of damp raw material will be finished in two steps. first the raw material will be carried the first grade positive pressure dry through the tail air of the second dry and supplement hot air.the used tail air with high temperature and low damp will be exhausted.the semi-sinished product will be dried the second grade negative dry through fresh hot air .the dried finished product will be paclaged through measure.the used tail air with high temperature and low damp will be used for the first grade dry.in this way the good cycle dry process will be finished.the supplemental hot air amount can be adjusted freely in accordance with needs.so the machine has wide adaptablilty. Application ◆The equipment is wide used for drying powder ,granule raw materials in food stuff industruff ,chemical industry,pharmaceutical industry,construction materials industry,etc.the prodrcts that had been used the equipment are as follows:starch ,glucose,fish powder ,sugar,less ,feedstuff,gluten ,plastic resin ,coal powder,dyestuff,etc. Flow chart
Specificatons
Technical parameters
|