Add:Yuecheng industry area

         of Jiangyin, Jiangsu

Linkman:Tang Kaidong

Tel:0510-86580268

Fax:0510-6580278

Post Code:214404

Http://www.chenggangz.com

E-mail:cg@chenggangz.com

………………………………◇◇◇Fluidizing Drier Series◇◇◇…………………………………

 

GFG Series High Efficient Fluidizing Drier

Main Application:

    This drier is suitable for drying granular matters with diameter from 0.1 to 6 mm in pharmaceutical ,chemical ,food and light industries.

Work Principle :

    The heated and purified air is sucked into the container where it fluidizes through screen plate under the action of stirring and negative pressure . Moisture in the matters (solidoid) will vapour rapidly when the solidiod contacts contacts gaseous phase in large area and then the vapoured moisture is discharged through the exhaust pipe .

Main Characteristics:

The mater container is sealed with pneumatic bag with advantages of convenient ,quick and reliable operation .

The container contains a stirring unit inside with which the matters have better fluidization without dead area so that drying is even and quick .

Tippling unloading is used so that it operates quickly and conveniently .

Drying is quick with 20 to 30 minutes per lot .

Adopt butterfly closure head featuring small windage and no dead area .Operation is carried out under sealing condition without any polution so that it meets requirements of GMP .

      Dimensions for Installation & Commections

Item Model
GFG-200 GFG-300 GFG-400 GFG-500 GFG-650
Main equipment H1 2676 2842 2785 2940 3014
H2 2366 2532 2585 2630 2704
H3 880 1040 1080 1140 1220
H4 940 1100 1140 1200 1280
A1 570 620 670 720 770
A2 560 610 710 710 760
B1 900 1000 1100 1170 1250
B2 960 1060 1160 1230 1310
¢c ¢1100 ¢1200 ¢1300 ¢1400 ¢1500
Blower bolts a 280 280 280 330 450
b 450 450 450 550 570
4-M×L M12×300 M12×300 M12×300 M12×300 M16×400
Dimensions for connections 1 ¢220 ¢250 ¢280 ¢300 ¢350
2 ¢260 ¢300 ¢330 ¢350 ¢400
3 ¢300 ¢350 ¢380 ¢400 ¢450
8-¢d ¢7 ¢9 ¢9 ¢11 ¢11
Steam inlet pipe G1" G1" G1" G1" G1" G1"
Steam(condensed water)outlet pipe G1" G1" G1" G1" G1" G1"

     Main Technical Data

Item Model
GFG-200 GFG-300 GFG-400 GFG-500 GFG-650
Bin capacity L 200 300 400 500 650
Production capacity Kg/Batch 30-60 50-100 60-120 70-150 100-200
Inlet air temperature 50-100 50-100 50-100 50-100 50-100
Blower capacity m3/h 3530 3650 3650 4830 6032
Blower air pressure H2O 500 533 533 605 787
Blower power KW 7.5 11 11 15 22
Stirring speed rpm 11 11 11 11 11
Stirring power KW 0.55 0.55 1.1 1.1 1.1
Steam consumption Kg/h 140 170 210 240 280
Steam pressure MPa 0.4 0.4 0.4 0.4 0.4
Compressed-air pressure MPa 0.5 0.5 0.5 0.5 0.5
Compressed-air consumption m3/h 0.6 0.6 0.6 0.9 0.9
Overall dimensions of main equipment L×W×H 2800×1350×2700 2900×1450×2900 3100×1650×2900 3100×1650×3000 3200×1750×3100
Weight of main equipment Kg 1000 1200 1450 1500 1700

 

 

3

XF-Series Cabinet Type Fluidized Drier

 

Application scope and working principle

      Fluidized drier ,the so-called fluidized bed has been continuously improved during the last 30 years ,and widely used in such fields as pharmaceutical ,chemical ,foodstuffs ,cereals process etc.e.g.dehumidification and drying for powdery ,granulate materials including raw-material drug ,granulate patent medicine ,electuary ,feed and plastic resin etc ,.material size can be set within 0.1-6mm and preferable at 0.5-3mm.

     Working principle can be detailed ad :Clean hot air enters into the bed through valve distribution and enables the wet materials entered from feeder to form fluidized state ,just like boiling water jumps inside the bed ,thus it's called fluidized drier ,the sufficient contact of hot air with materials realizes the prompt drying process ,which takes only a few seconds time to finish the whole fluidization .

    As the materials temperature will not be higher due to short drying time ,thr drier is also applicable for thermosensitive materials.

Heating methode:

    Steam or electric heating ,oil fueled (or coal fueled) thermal furnace can also be used .

Installation discription:

    1.Fluidized bed ,spiral separator and bag dust filter can be positioned directly on the flat cement floor without anchoring bolt .fan can be in -door or out-door installed with base and anchoring bolt ,outlet shall be designed according to actual conditions.

    2.No leakage is allowed to the air route system to avoid influence to the drying result.

  Main technical date:

Data Drying capacity (water kg/h) Fan Air inlet temperature(℃) Discharge temperature(℃) Heating power
Power(KW) Pressure(Pa) Volume(m3/h) Steam(Kg/h) Electricity(KW)
Model

XF-10A

10-15 5.5 4900 2300 60-140 40-80 50 30
XF-10B 4 3800 2300
XF-20A 20-25 7.5 5000 3100 100 60
XF-20B 5.5 3500 3100
XF-30A 30-45 15 6000 4200 150 90
XF-30B 11 4700 4200
XF-50A 50-80 22 7400 6000 250 150
XF-50B 18.5 5900 6000

   *heating power,steam and electricity can be used separately.

  

2

 

FG Series Fluidizing Drier

 

Application:

▲Pelletizing and covering of medicines

Pelletizing:granulates used for table ,electuary and capsule.

Film covering:granulate ,film coat ,enteric coat ,slow release coat 

▲Pelletizing and covering of foods

Sugar ,coffee ,cocoa powder ,cream ,powdery fruit juice,  mixed starch ,amino acid ,bulked food etc.

▲Pelletizing of pesticide ,color base and dye materials

▲Drying of powdery ,granulate or bulk materials .

Features:

▲Modify fluxility and reduce dust spraying through powdery granulation.

▲Modify solubility through powdery granulation.

▲Mising-pelletizing-drying-are finished in one machine,  the so-called one phase granulation.

▲Electrostatic-proof filtering material is adopted to ensure safe operation of the equipment .

▲Perssure release hole is designed to avoid damage to operating personnel caused by explosion .

▲The equipment is free of dead space ,convenient and cleaning handing meets the standard of GMP .

     Technical Data

Model 3 5 15 30 60 120 200 300
Item Unit
Raw material container Volume L 12 22 45 100 220 420 670 1000
Diameter mm 300 400 550 700 1000 1200 1400 1600
Production capacity Min. kg/lot 1.5 4 10 15 30 80 100 150
Max. kg/lot 4.5 6 20 45 90 160 300 450
Fan Air volume m3/min 8 8 15 25 50 75 100 150
Air pressure mmh2o 375 375 480 480 950 950 950 950
Power kw 2.2 2.2 4 5.5 11 18.5 22 30
Steam consumptio kg/h 12 23 42 70 140 211 282 366
Compressed air flow m3/min 0.3 0.3 0.3 0.4 0.6 0.6 0.9 1.5
Temperature Automatic adjustment from normal temperature to 120
Operation time m/min dependent upon materials
Material collection rate % >99%
Density of adhesive kg/L ≤12.5
Noise db ≤75(fan isolation treatment)
Main machine height mm 2200 1800 2100 2300 3000 3300 3800 4300
Damp-warm syndrome content % Canreach0.2

 

 

 UP PRODUCT       NEXT PRODUCT   

   

版权所有:江阴市成干干燥设备有限公司  Copyright©Jiangyin Chenggan Drying Equipment Co.,Ltd.